Home
Up
Specials
New Products
Glass Machines
Lapidary Supplies
Information
Catalog Request
Intro to Lapidary
Intro to glass beveling
About us

Ball Bearing Arbors

Quality arbors used by Covington for their vertical units with heavy duty ball bearings, neoprene sealed and greased for life. All arbor shafts are made from TGP (Turned, Ground, & Polished) Steel to reduce vibration.  Rubber mounted in heavy aluminum castings with pulley, v-belt, flanges and nuts. 


Two-Station Closed Arbor

Arbor comes with nuts, 3” drive pulley, V-belt and two sets of 3” diameter flanges. Split housing, with closed front, locks together using two bolts.  Each bearing is set on shaft with two set screws. Arbor can be disassembled and reassembled in minutes.

* The arbor shown is the same one used in Model #400 Grinder-Polisher.

TSA402--With 1" x 18" shaft. Shipping weight 20 lbs. $ 236.25
TSA404--With 3/4" x 18" shaft. Shipping weight 20 lbs. $ 225.75

Two-Station Open Arbor

Arbor comes with nuts, 3" drive pulley, V-belt and two sets of 3" diameter flanges. Split housing with open center, locks together using two bolts. Each bearing is set on shaft with two set screws.
The arbor and shim are the same parts used in Model No. 5050 Cork & Felt Polisher and Model No. 5051 Vertical Beveler & Edger.
Arbor Shim Sold Seperate
TSA412--With 1" x 23 3/4" shaft. Shipping weight 20 lbs. $ 262.50
CAS158--2" high cast aluminum arbor shim. This 10 5/8"L x 5"W x 2"H. Arbor shim will raise the No. 412 arbor 2" $ 26.25

Four Station Open Arbor

Now Includes CAS158 Aluminum Shim
(Shim raises arbor 2")
 

Build your own multi-purpose machine. No spacers needed.
Arbor will take large and small wheels, expando drum, tapered spindle, aluminum disc head and cone wheel; each individually secured to the shaft. To reverse the rotation of the shaft, turn arbor 180 degrees-the back side can be the front. Clam-type housing permits quick wheel guard, tanks and water systems you need and make the machine complete.

Arbor comes with nuts, 3" drive pulley, V-belt and four sets of 3" diameter flanges, Shaft includes 1/2" 20 X 1" long studs on each end. Two alternate sets of 2" diameter x 1/2" flanges are included. Each wheel is individually secured by one flange with set screws and floating flange with nut. 1" diameter shaft in center, outboard 5/8"

AR5055--Four-Station Open Arbor
Size 34"L x 6"W x 10"H, Shipping weight 20 lbs.
$ 341.25

Extra Shafts with Nuts (less flanges & bearings)

CAS018-- 1" dia. x 18" long with 1" - 14 R.H. & L.H. threaded ends $ 89.25
CAS021-- 1" dia. x 21" long with 1" - 14 R.H. & L.H. threaded ends $ 99.75
CAS024-- 1" dia. x 23 3/4" long with 1" - 14 R.H. & L.H. threaded ends $ 115.50
CAS030-- 1" dia. x 30" long with 1" - 14 R.H. & L.H. threaded ends $ 131.25
CAS036-- 1" dia. x 36" long with 1" - 14 R.H. & L.H. threaded ends $ 136.50
FSA032-- 1" dia. x 32" long.  Same as AR5055 $ 168.00

More Arbors...


LAPIDARY EQUIPMENT
ARBORS BEAD MILLS BELT SANDERS BOOKS
CARRIAGE SLAB SAW KITS CARVING & BUFFING KIT COMBO UNITS DELUXE TUMBLERS
DIAMOND BLADES DIAMOND COMPOUNDS DIAMOND DISCS DIAMOND DRILL BITS
DOP STOVES/WAX DRUM SANDER ELECTRIC MOTORS ESTWING TOOLS
EXPANDO DRUM UNITS FLANGES FOREDOM CRAFT KIT GEM DRILLS
GOLD PANS GRINDER-POLISHER GRINDING WHEELS GRITS
HAMMERS HORIZONTAL LAPS JEWELRY BUFFERS JEWELRY WIRE BENDER
KOOLERANT MAXI LAPS NEEDLE FILES OPTIVISOR
PLIERS & CUTTERS POLISHING POWDERS PULLEYS ROCIPROLAP
ROLLING TUMBLERS SANDERS / WET-BELT SANDING DISC & BELTS SILVER SOLDER
SLAB SAWS SLAB SAW OIL SPHERE MACHINES SPLASH GUARDS
TEMPLATES TRIM SAWS TUMBLERS VIBRATING LAPS
VIBRATING TUMBLERS VINYL APRONS WIRE SAWS 3M BRISTLE DISC'S

   

GLASS MACHINES

CORK & FELT POLISHER GLASS BEVELERS GLASS ENGRAVER GLASS LATHE
GLASS SAWS & BLADES GLASS SMOOTHER & KITS ROCIPROLAP SANDERS / WET-BELT

Covington® Engineering Corporation
U.S. Toll Free (877)793-6636  Outside U.S. 909-793-6636  Fax 909-793-7641
Email us at sales@covington-engineering.com
715 West Colton Avenue -- P.O. Box 35 -- Redlands, CA 92373