Use Silicon Carbide, Diamond, Cork & Felt
|
Wet Belt Sanders and Polishers Feature:
· Unobstructed
access to sanding work area.
· Quick
change belt system.
· Adjustable
backup plate. Sands flat surfaces vertically with up to a
13” high back
plate.
· Upright
bearing support casting mounted on a heavy aluminum
tank base or a heavy
16 gauge powder coated steel tank base.
· Delivery
sponge for applying water to belt.
· Single
control alignment to keep belt running true.
· Shielded
bearings, double sealed and greased for life.
· Operating
instructions and guarantee.
*All Now Available With 220v 50hz Motors. Additional cost only
$ 42.00
Specify
Special Voltage
When Ordering.
|
Basic Wet Belt Sander
|
A really affordable wet belt sander. Takes 3" x
24" size belts. Sold less motor, water valve and spray nozzle. Size
11"L x 9"W x 17"H. Shipping weight 20 lbs.
|
| Model No. 464WBS -- Wet Belt Sander
|
$ 375.00
 |
|
Mounted Wet Belt Sander
|
 This sander features the No. 464 unit with 1/3 HP, 110V
motor and belt guard mounted on new rust proof aluminum topped Lami-I-Cushion base ready to plug in and
operate. Water valve and spray nozzle is built in for easy hookup. Water
valve takes 1/4" O.D. plastic tube for gravity water flow or
1/4" copper tube for pressure system. If needed, drain system can be
provided by 1/2" O.D. plastic tube. Just squeeze tube end and insert
in drain port. Overflow can then drain from sander tank. Size 25"L x
13"W x 19H. Shipping weight 45 lbs. |
| Model No. 466WBS -- Mounted Wet Belt Sander
|
$ 525.00
|
|
Commercial Wet Belt Sander
|
This wet belt sander and polisher is designed for
production type work. 3" x 41 1/2" size belts provide for
greater surface cutting and extended belt life. comes with 4" high
back plate. Same water system as the smaller mounted sander. Comes
complete with 1/3 HP, 110V motor and belt guard mounted on new rust proof
aluminum topped Lami-I-Cushion
base ready to plug in and operate. Size: 25"L x 13"W x
27"H. Shipping weight 50 lbs. |
| Model No. 760WBS -- Commercial Belt Sander |
$ 736.25
|
| HBP013 -- 13" High Back Plate |
$ 47.25
|
Model No. 761WBS -- Deluxe Belt Sander
(Same as No. 760 except this unit comes with 1/2 HP motor and 13"
high back plate)
Now comes with 4" backing plate at no additional cost.
13" high back plate makes it possible to wet sand flat surfaces
vertically.
|
$
866.25
|
|
Combination Wet Belt Sander & Muslin Buff Polisher
|
 This combination unit has all the features of the features
of the No. 466 sander plus a polish arbor that mounts a 6" muslin
buff. Comes complete with a 1/3 HP, 110V motor and belt guard mounted on
rust proof aluminum topped Lam-I-Cushion base ready to plug in and operate.
Now Available With 110v or 220v 50 hz Motor
For Use Outside U.S. Additional cost only
$ 42.00 Specify Voltage
When Ordering
Size 25"L x
13"W x 18H. Shipping weight 45 lbs. |
| Model No. 465WBS -- Combo Wet Belt Sander |
$ 615.00
|
| Model No. 4652WS -- Combo Wet Belt Sander
110/220v 50hz |
$ 650.00
|
|
Wet-Belt Horizontal Sanders & Polishers
|
 |
Features:
- Uses silicon carbide, diamond, cork, leather
& felt belts
- Shielded bearings, double-sealed and greased for
life
- Delivery sponge for applying water to belt
- Steel back plate for support. Sand flat surfaces
horizontally
- Allows much larger pieces to be worked
The 460 Horizontal Sander features a 1/3 horsepower
110V motor mounted on a 12" x 24" rust proof aluminum
topped Lam-I-Cushion base. A
water valve and spray nozzle is built in to the hood for easy hookup
to your water supply. The water valve takes 1/4" O.D. plastic tube
for gravity feed or 1/4" copper tube for pressure systems. If needed,
drain system can be provided by 1/2" O.D. plastic tube. Just squeeze
tube and insert in the drain port. Overflow can then drain from the sander
tank. This unit uses the 3" x 25-7/32" sanding belts, with the
quick change belt system so you can change your belts quickly and easily.
The supported back plate gives you approximately a 3" x 6"
working surface. Size 12" x 24" x 8". Shipping weight 50
lbs. |
| Model No. 460WBS -- Horizontal Sander |
$ 551.25
|
The 762 Horizontal Sander features
a 1/2 horsepower 110V motor mounted on a 21" x 24" rust proof
aluminum topped Lam-I-Cushion
base. This wet belt sander is designed for production work. The 3" x
13" working surface. This wet belt sander also has the quick-change
belt system so you can change your belts quickly and easily. |
| Model No. 762WBS -- Commercial
Horizontal Sander |
$ 892.50
|
