|
| |
CABKING!! NEW
8" CABKING!! The CABKING-8V1 is a rugged,
professional grade 8” diameter diamond wheel grinding and polishing machine for
all your cabbing needs. One of the main elements of this machine is the water
cooling system. The CABKING-8V1 has an adjustable, independently controlled drip
feed cooling system that drips clean water on the wheels instead of bubbling up
dirty water. This system is based on a separate water pump that eliminates
costly upkeep of the built in air pump found on other machines. The water system
allows for individual cooling of the wheels and water flow can be controlled
from a drip to a stream. Our simplified drainage system has a hose connected to
the rust-free pans so you can drain the dirty pan water without having to
constantly pour it out. The advanced cooling system is just one of the many
features found in the CABKING-8V1.
Key Features
• Durable, direct drive 3/4 HP, 1800RPM motor, 110V
• Independently controlled drip feed water cooling system
• 2 electroplated diamond grinding wheels 8” x 1.5”, 80# and 220#
• 4 resin diamond pre-polishing wheels 8” x 2”, 280#,600#,1200#,3000#
• Full face 8” diamond lap for grinding flats
• Stainless steel, removable, independent hoods
• Rust free, easy to clean, drip pans can be set up for forward or rear drainage
• Built in adaptor for polishing or grinding laps on both shafts
• Separate 30 watt water pump with on/off foot switch
• Water drainage system to eliminate constantly draining drip pans
• Built-in light and metal adapters for other types of lamps
• Removable stone trays and hand rests
• Polishing accessory kit (canvas disc, diamond paste, goggles, apron)
• Ability to use the same Trim Saw attachment as the CABKING-6V3
• Versatile shaft which can accept a variety of 1” arbor wheels
• Assembly required attach motor to base board & mount wheels
Comes in
Three boxes (assembly required).
Motor box - 75lb, 40" x 13" x 14"
Hood/pan/baseboard/accessories - 58lb, 50" x 17" x 18"
Wheels - approx 25lb, 20" x 14" x 11"
Footprint - 42" x 16"
Assembled weight: 160lb
Plus: Order now and receive an extra set
of Resin Wheels 280#, 600#, 1200# & 3000# ($368.00 value)
FREE FOR A LIMITED TIME!
Also Receive Free Shipping
Within Continental United States!!
 Close-up
of Flat Grinding Disc
 Close-up
of Canvas Pad
| Model, CABKING 8" Cab Grinder
Polisher 110v 60hz |
$ 2,399.00 |
 |
A complete 6”
diamond grinding and polishing machine, has a 1/4 hp, 110v, 1800 rpm, 60hz
motor, a 30 watt, 605 GPH, 110/115 volt pump. With a 6 watt, 12 volt, single
bayonet lamp. 220v 50hz model available.
Features:
- Direct drive motor and separate
submersible pump to reduce maintenance.
- Individual on/off water shut off
valves above each wheel, also for right and left hand grinding/polishing
pads (no cross-contamination of grit) allows easy of movement from wheel to
wheel to disc.
- A drainage system to eliminate
having a constantly discard pan water.
- Heavy-duty base board, aluminum
splash hoods with adjustable clear splash shields, plastic pad with drain
holes, comes with four side splash guards, and two front hand metal rests.
- Plastic apron, wrench, clear
plastic goggles, complete instructions.
- One (1) each 6” x 1-1/2” #80 and
#220 metal bonded diamond grinding wheels, (4) 6” x 1-1/2” diamond resin
bond wheels, (1) each #280, #600, #1200, and #3000, a 6” #360 no hole 1/4-20
right hand threaded diamond flat lap and a 5-1/2” 1/4-20 right hand canvas
polishing pad with 2 grams of syringe of 14,000 diamond paste compound. One
year limited warranty on motor and parts.
Overall size is 27” long x 13” deep
x 12” high. Shipping Weight 55lbs.
Limited Time!! Free Shipping Within
Continental United States!!
  *Full
face Diamond Lap Shown
| Model, CABKING Cab Grinder
Polisher 110v 60hz |
$ 1,399.00 |
|
| Model, CABKING Cab Grinder
Polisher 220v 50hz |
$ 1,399.00 |
|
Diamond
Resin Grinding Wheels
Our Diamond Resin Wheels are an outstanding option to the Nova
and Flex wheels. Diamond Resin Wheels are great for cabbing and contour
grinding. One of the best benefits is that there is no need to break in the
wheels, they are ready to go out of the box. They fit any standard machine and
come with a 1” arbor with bushings. Low introductory
price!!
More Diamond Wheels
|
