Home
Up
Specials
New Products
Lapidary Equipment
Lapidary Supplies
Information
Catalog Request
Intro to Lapidary
Intro to glass beveling
About us

10" Cork & Felt Glass Polisher


A quality glass polisher for pre-polish with pumice and final polish with cerium oxide.
Due to the uncertainty of getting cork wheel replacements these machines are available in limited quantities!

Wheels turn up on our 10" Cork and Felt Polisher.  Allows for greater control and ease of use.  The 5050's  comes with a 1” x 23 3/4” shaft, a 10" x 2" cork wheel on the left and a 10" x 2" felt wheel on the right.   Wheels are factory dressed and tested for balance.  Felt wheel is installed with metal side supports. Wheels turn at slow 420 RPM to minimize polish powder loss.  Rim speed of 1,100 SFM creates the friction necessary for a brilliant finish.  Unit comes fully assembled with belt guard, 1/3 HP motor, instructions, and guarantee. Ships Freight Collect

Model No. 5050GB--Cork & Felt Polisher $ 1,435.00

16" Cork & Felt Glass Polisher

Vertical Polisher Features:
  • Adjustable sponge bench to minimize splash
  • Back plate with spray nozzle
  • Removable tank for easy wheel change
  • 1/2 HP Hy-torque motor

Arbor with 1" diameter x 25 1/2" long shaft can be quickly disassembled (4 bolts) for pulley change or bearing inspection. Heavy duty ball bearings are sealed and greased for life. Two 1/2" O.D. x 30" long plastic tubes provide optional drain system. Just squeeze tube ends, insert in drain ports and drain lines are in place. Water valves take 1/4" O.D. plastic tube for gravity water flow or 1/4" copper tube for pressure system. 

Unit comes with 16" x 3" cork and 16" x 3" felt wheels installed, dressed and tested for balance at the factory. Wheels turn at slow 280 RPM to minimize polish powder loss. Rim speed of 1,200 SFM creates the friction necessary for a brilliant finish.

Unit is fully assembled with belt guard. 1/2 HP motor (shipped separate) , instructions and guarantee.
Size 32"L x 30"W x 24"H. Ships Freight Collect
Model No. 5016GB--Cork & Felt Polisher $ 2,655.00

   


LAPIDARY EQUIPMENT
ARBORS BEAD MILLS BELT SANDERS BOOKS
CARRIAGE SLAB SAW KITS CARVING & BUFFING KIT COMBO UNITS DELUXE TUMBLERS
DIAMOND BLADES DIAMOND COMPOUNDS DIAMOND DISCS DIAMOND DRILL BITS
DOP STOVES/WAX DRUM SANDER ELECTRIC MOTORS ESTWING TOOLS
EXPANDO DRUM UNITS FLANGES FOREDOM CRAFT KIT GEM DRILLS
GRINDER-POLISHER GRINDING WHEELS GRITS HAMMERS
HORIZONTAL LAPS JEWELRY BUFFERS JEWELRY WIRE BENDER KOOLERANT
MAXI LAPS NEEDLE FILES OPTIVISOR PLIERS & CUTTERS
POLISHING POWDERS PULLEYS ROCIPROLAP ROLLING TUMBLERS
SANDERS / WET-BELT SANDING DISC & BELTS SILVER SOLDER SLAB SAWS
SLAB SAW OIL SPHERE MACHINES SPLASH GUARDS TEMPLATES
TRIM SAWS TUMBLERS VIBRATING LAPS VIBRATING TUMBLERS
VINYL APRONS WIRE SAWS 3M BRISTLE DISC'S

   

GLASS MACHINES

CORK & FELT POLISHER GLASS BEVELERS GLASS ENGRAVER GLASS LATHE
GLASS SAWS & BLADES GLASS SMOOTHER & KITS ROCIPROLAP SANDERS / WET-BELT

Covington® Engineering Corporation
U.S. Toll Free (877)793-6636  Outside U.S. 909-793-6636  Fax 909-793-7641
Email us at sales@covington-engineering.com
715 West Colton Avenue -- P.O. Box 35 -- Redlands, CA 92373