|
|
|
|
|
| CED625--6" x 2 1/2"
Expandable Drum Takes 2 1/2" x 18 15/16" belt. Shipping weight 5 lbs. |
$ 69.00 |
 |
| CED830--8" x 3" Expandable
Drum Takes 3" x 25 7/32" belt. Shipping weight 6 lbs. |
$ 79.00 |
|
Vise Lock 8" Drum Sander
Sturdy Cast Aluminum Construction & Balanced for Vibration Free Operation
The 3" rim is covered with resilient sponge rubber. It's easy to change sanding cloth. The lock area is threaded for set screw operated clamp. Just loosen to remove the old cloth and retighten to secure the new. Drum comes with 220 grit wet/dry sanding cloth installed.
| LLD452--8" x 3" Lever Vise
Lock Drum With set screw for smooth shafts. Specify 1/2", 5/8", 3/4" or 1" bore size. cloth sanding strip can be loosened and retightened by a small lever. A quick, convenient method for changing sanding cloth. Shipping weight 6 lbs. |
$ 59.00 |
|
| LLD458--8" x 3" Lever Vise
Lock Drum With 1" - 14 RHT. Shipping weight 6 lbs. |
$ 62.00 |
|
| SR 3X25--3" x 25 1/2" extra sponge rubber for above drum | $ 4.40 |
|
| SC 3X15--3" x 15' rolls of wet/dry silicon carbide sanding cloth in 100, 220, 400, 600 or 800 grit. Specify grit when ordering. | $ 13.25 |
|
Aluminum Disc Heads
For Sanding & Buffing
These disc
heads are made from our aluminum castings. Each is machined true and balanced
for smooth and vibration free operation. The face of the head is covered with
resilient sponge rubber. Attach sanding or polishing disc to rubber face with
Stick-N-Peel adhesive.
IMPORTANT: When ordering, state left or right hand and thread size. Now you
can special order common threading on almost any head for an additional $10.00
Set-up fee. Allow an additional week for special orders.
| CAH494--6" Head With sponge rubber, with 1/2" - 20 or 5/8" - 18 R.H. bore (specify) | $ 35.00 |
|
| CAH430--8" Head With sponge rubber only & set screw for smooth 1/2", 5/8", 3/4", & 1" shaft. | $ 45.00 |
|
| CAH429--8" Head With sponge rubber only & bore sizes 1/2" - 20, 5/8" - 18, 3/4" - 16, 1" - 14 left or right hand thread. Shipping weight 6 lbs. | $ 50.00 |
|
| CAH440--10" Head With sponge rubber only & set screw for smooth shaft 5/8", 3/4", & 1" | $ 60.00 |
|
| CAH690--8" Head With sponge rubber only 5/8" smooth shaft for 690HCU | $ 45.00 |
|
| CAH691--10" Head With sponge rubber only 5/8" smooth shaft for 691HCU | $ 65.00 |
|
Most Aluminum Heads Can be Ordered With Common threading For An additional $10.00 Set up Fee. Please Call or e-mail for Details.
Replacement Sponge Rubber and .065 Hard Rubber
| 4" Square | $ 1.95 |
|
| 6" Square | $ 2.50 |
|
| 8" Square | $ 3.45 |
|
| 10" Square | $ 4.40 |
|
Disc Adhesive
For sanding & buffing
discs. Press it on, it holds. Lift it up, it peels off.
| Order # FDA041 -- 5 oz. tube | $ 11.50 |
|
