Starter Grit & Polish Kit
Includes
1 lb 60/90g, .75 lb 120/220g, .75 lb 3-f - 400g,
.50 lb Old Miser Grit Carrier, and .50 lb Covington Tumbler Polish.
|
|
SGPK01 |
$ 16.50 |
 |
|
Lapping Grit Kit
Includes
1 lb of each 60/90, 120/220, &
3-f - 400 grits
|
|
LGK001 |
$ 11.00 |
|
|
Tumbler Grit and Polish Kit
Contains one pound each of 60/90, 120/220, 400
grits; 1lbs. tumbler polish powder, 12oz. Old Miser®
grit carrier. Shipping weight 6 lbs. |
|
TGP001 |
$ 22.75 |
|
|
Jumbo Tumbler Grit & Polish Kit
Contains 5 lbs. each of 60/90, 120/220, 400 grits; 5
lbs. tumbler polish powder; 5 lbs. Old Miser®
grit carrier. Shipping weight 30 lbs. |
|
JGK005 |
$ 93.50 |
|
|
Grit and Polish Brushes
|
| 6 brushes, 1/2" x
6" size |
|
GPB649 |
$
2.50 |
|
|
Non-Graded Silicon Carbide Grits
|
|
Grit Size
|
1
LB. Box
|
5
LB. Box
|
50
LB. Box
|
|
60/90 -80 Grit
|
$ 3.25 |
|
$ 14.60 |
|
$ 75.00 |
|
|
120/220 Grit
|
$ 3.50 |
|
$ 15.75 |
|
$ 81.00 |
|
|
3f-400 Grit
|
$ 4.55 |
|
$ 20.45 |
|
$ 140.00 |
|
|
5f-600 Grit
|
$ 5.95 |
|
$ 26.75 |
|
$ 167.50 |
|
|
8f-800 Grit
|
$ 6.50 |
|
$ 29.25 |
|
$ 194.75 |
|
|
10f-1000 Grit |
$ 10.75 |
|
$ 48.35 |
|
$ 298.75 |
|
|
12f-1200 Grit |
$ 12.25 |
|
$ 55.10 |
|
$ 335.00 |
|
Graded Silicon Carbide Grits
|
|
Grit Size
|
1
LB. Box
|
5
LB. Box
|
50
LB. Box
|
|
14 Grit
|
$ 4.25 |
|
$ 19.10 |
|
$ 135.00 |
|
|
60 Grit
|
$ 3.50 |
|
$ 15.75 |
|
$ 92.00 |
|
|
80 Grit
|
$ 3.50 |
|
$ 15.75 |
|
$ 92.00 |
|
|
120 Grit
|
$ 3.50 |
|
$ 15.75 |
|
$ 92.00 |
|
|
220 Grit
|
$ 3.90 |
|
$ 17.50 |
|
$ 102.75 |
|
|
320 Grit
|
$ 5.00 |
|
$ 22.50 |
|
$ 178.50 |
|
|
400 Grit
|
$ 6.10 |
|
$ 27.45 |
|
$ 227.00 |
|
|
600 Grit
|
$ 9.90 |
|
$ 44.55 |
|
$ 362.25 |
|
Tumbling Media
|
Burnishing Compound
|
| Great for both silver and gold. A
high quality burnishing and lubricating compound. Use in the ratio of one
heaping tablespoon to one gallon of water. Adjust if necessary. For
bright, clean finishes, the burnishing compound must be used in the right
proportion and any resulting sludge rinsed away before particles embed and
dull the metal. |
| BRN001--
Burnishing compound |
|
1 lb |
$ 6.30 |
|
5lbs |
$ 28.35 |
|
Ceramic Angle (Angle cut triangle)
|
| A 3/8" x 5/8" size
ceramic media containing no abrasives. When tumbling rocks, use ceramic
angles as a pre-filler to occupy space inside the tumbler and as a carrier
to deliver grain abrasives to the work pieces. Adds weight to the load for
increased tumbling action and separates work pieces to eliminate parts
sticking together. |
| CCA001--
Ceramic Angle |
| 1 lb |
$ 3.50 |
|
5 lbs |
$ 15.75 |
|
Corn Cob
|
| A pithy material made from the hard
woody ring of the corn cob. It is used as a very gentle finish and drying
media in polishing and burnishing metals. Absorbs many times its weight.
Readily removes oil, dirt and grease from tumbled parts. |
| CCC001--Corn Cob 10/14 Mesh |
| 1 lb |
$ 2.00 |
|
5 lbs |
$ 9.00 |
|
Garnet Sand
|
| An excellent aid
to grinding and polishing stones or glass in a vibrating or rolling
tumbler. It's small size helps aid in grinding and polishing those
tough to get areas. Use about 1/4" cup of garnet per
quart of rocks. Use mixture from rough grind all the way to
polish. |
| CGS001--
Garnet Sand 8/12 mesh |
|
1 lb |
$ 2.25 |
|
5 lbs |
$ 10.25 |
|
Ground Walnut Shell
|
| Use in a tumbler with a pinch of
powdered red rouge to put a brilliant polish on brass shell cartridges or
a hand polished look on silver and gold jewelry. |
| GWSF01--
Walnut Shells, Fine 12/20 Mesh |
|
1 lb |
$ 2.00 |
|
5 lbs |
$ 9.00 |
|
| GWSC01--Walnut Shells, Coarse
8/12 Mesh |
|
1 lb |
$ 2.00 |
|
5 lbs |
$ 9.00 |
|
Plastic Pellets
|
| 1/8" plastic pellets act as
cushioning media when tumbling delicate materials, especially during the
polishing cycle. Pellets float off for easy separation and reuse. |
| PPS001--
Plastic Pellets |
| 1 lb |
$ 4.00 |
|
5 lbs |
$ 18.00 |
|
Plastic Pyramids
|
| A 1/4" size plastic media used
wet on all precious metals for cut down prior to burnishing with steel
shot. Fast cutting and produces an excellent finish. The plastic pyramids
are made with a 400 grit quartz abrasive embedded inside. The batch must
be rinsed clean periodically to maintain clean media and metal surfaces. |
| PYR001--
Plastic Pyramids with 400
Grit Quartz |
|
1 lb |
$ 4.50 |
|
5 lbs |
$ 20.25 |
|
Steel shot Jewelry Mixture
|
| A superior mix of balls, pins, ball
cones and cylinders. Just the right sizes for jewelry work. The mixture
insures maximum coverage of a wide variety of work pieces. Shot is made
from hard, low carbon steel with a mirror bright surface. Use 10 parts
shot to 1 part work piece (by volume) using burnishing soap and water.
CAUTION: The burnishing compound must be used in the right proportion and
any resulting sludge rinsed away before particles embed and dull the
metal. Five pounds approximate on pine in volume. |
| CSS001--
Steel Shot Jewelry
Mixture |
| 1 lb |
$9.50 |
|
5 lbs |
$42.75 |
|
