Maxi Lap Series Features:
- No hole cutting discs
- Three (3) quick change aluminum heads
- Unobstructed access to work area (when head is
elevated with spacer)
- Compact and portable - can be hand carried
- Water can assembly, instructions and guarantee
Horizontal Maxi unit has cast aluminum body with beautiful green hammer
tone finish. Arbor rides in precision ball bearings, neoprene sealed and
greased for life.
Each unit comes with 3 each (Quick change) 8" x
1/2" - 20 RH threaded disc type aluminum heads with 1/8" hard
rubber, no hold, mounted on face and 1/3 HP, 110V, 60 HZ heavy duty motor
with carrying handle. Aluminum head turns at 1410 RPM. |
|
8" Standard Maxi Lap
|
Three (3) quick change aluminum heads and fast
cutting silicon carbide abrasive system
|
| Standard kit: 2 each 8" diameter x
NH silicon carbide sanding discs, 100 & 400 grit; 1 each 8"
diameter x NH, 1/8" thick felt polishing disc; and one pound of
optical grade cerium oxide polish. Discs are affixed to hard rubber face
with "Stick-N-Peel" adhesive. $
735.00 |
Model No. 5070 -- 8" Standard
MAXI Lap, Size 23"Lx12"Wx15"H. Ship wght 35
lbs.  |
|
8" Standard Diamond Maxi Lap
|
Three (3) quick change aluminum heads and faster
cutting diamond cloth abrasive system
|
| The Standard Kit has now been replaced
with the faster cutting Diamond Abrasive System. This system consists of 2
each 8" x NH diamond sanding discs, 220 & 1200 grit; 1 each
8" x NH, 1/8" thick felt polishing disc; and one pound of
optical grade cerium oxide polish powder. Discs are affixed to hard rubber
face with "Stick-N-Peel" adhesive |
| Model No. 5071 -- 8" Diamond
MAXI Lap, Size & weight same as #5070. $ 840.00
|
|
8" Super Diamond Maxi Lap
|
Three (3) quick change aluminum heads & fastest
cutting diamond grid-a-brade abrasive system
|
| The Standard Kit has now been replaced
with the fastest cutting Diamond Abrasive System. This system consists of
3 each 8" x NH grid metal bond diamond cutting discs, 100, 220 &
600 grit. 8" magnetic holder is included. Simply attach the adhesive
backed, flexible magnetic holder to hard rubber face of one head. No
additional adhesive or shaft nuts are required. Your grinding head is now
ready to take diamond cutting discs. When you are through with one grit
size, simply lift it off and position the next disc. It's that easy!
Also included: 1 each 8" x NH cork polishing
disc, mounted on hard rubber face of one head and one pound of 2F pumice
polish powder; and 1 each 8" x NY, 1/8" thick felt polishing
disc mounted on hard rubber face of one head and one pound of optical
grade cerium oxide polish powder. Note: Cork and felt discs are affixed to
hard rubber face with "Stick-N-Peel" adhesive. |
| Model No. 5072 -- 8" Super Diamond
MAXI Lap,
$1,207.50
|
| Model No. 5073 -- 10" Super MAXI
Lap, same as 5072 with 10" discs $1,627.50
|
