|
|
|
|
|
| Model # 383TSM- Three headed Sphere Machine | $ 2,675.00 |
|
| Model # 3832TM- Three headed Sphere Machine 220V, 50hz | $ 2,675.00 |
![]() |

Dual 1/3 hp. 110v motors.
Automatic Grit application with slurry bowl.
Spring loaded cutting heads.
Cutting angle adjustment.
Shielded arbor shafts and bearings.
Large metal cabinet with shelf.
Makes beautiful spheres from 1 1/4" to 9" in size.
The downward slanted cutter cups and shafts
run the sphere in a bath of grit. This eliminates the need to constantly dab
grit on with a brush. It also causes the grit slurry to run away from the
bearing. The angle of the cutting cups can be increased as the rough corners of
the sphere grind off. Both heads are spring loaded, so continuous adjustment is
unnecessary. Unit comes complete with the above features, 2 polishing buffs, 2
grit pans, instructions, guarantee, and choice of one pair of cutter cups.
Please state cup size when ordering.
This machine will be shipped FREIGHT COLLECT.
Can Be Modified to 220v 50hz Call for Details!!
| Model # 381LSM- Large Sphere Machine | $ 1,795.00 |
|
| Model # 3812LM- Large Sphere Machine 220V, 50Hz | $ 1,937.00 |
![]() |

Automatic Little Sphere maker Features:
Dual 1/18 HP, 110V motors
Automatic grit application
Spring loaded cutting heads
cutting angle adjustment
The downward slanted cutter cups and shafts run the sphere in a bath of grit.
This eliminates the need to constantly dab grit on a with a brush. It also
causes the grit slurry to run away from the bearing. The angle of the cutting
cups can be increased as the rough corners of the sphere grind off. Both heads
are spring loaded, so continuous adjustment is unnecessary. Unit comes complete
with the above features, 1 grit pan, instruction, guarantee and one pair of
1/4", 3/8", 5/8" and 7/8" cups.
Machines size: 16"L x 8"W x 8"H, Shipping weight
30 lbs.
| Model No. 382SSM -- Little Sphere Maker | $ 498.75 |
|
| Model No. 3822SM -- 220v 50hz Sphere Maker | $ 551.25 |
![]() |
Extra Cutter Cups Pair (Model 381)

The cast iron cutter cups are designed to give user
maximum grinding surface contact while providing for imperfections in the
preformed spheres. These high quality cups are preferred and used by many
lapidary and glass artists. Cut Sizes will vary by rock and machine.
Now Available in 3/4" National Pipe Thread @ No Additional
Cost. Specify at Checkout!
Extra Cutter Cups Three (Model 383)
Extra Cups (Model #382):
| SSM001 -- Extra 1/4" Cups, Pair | $ 5.00 |
![]() |
| SSM002 -- Extra 3/8" Cups, Pair | $ 5.50 |
![]() |
| SSM003 -- Extra 5/8" Cups, Pair | $ 6.00 |
![]() |
| SSM004 -- Extra 7/8" Cups, Pair | $ 6.50 |
![]() |
| SSM005 -- Set of 2 Each | $ 20.50 |
![]() |

Sintered
Shown for DetailThese 4” Cutter cups provide faster grinding than
conventional silicon carbide cutter cups. The three metal-bonded, sintered cups
give an aggressive grind without being harsh and can accommodate spheres from 3
3/4” to 6 1/2”. The five finishing, resin bonded cups give user good control
and a quick grind. These cups have been tested by glass and lapidary artists
and have been given rave reviews. All cups come with 3/4” National Pipe thread.
Not available in 1-8 National Coarse.
Sintered
Resin Bonded

Kit will make spheres from 1 1/4" to 4" in size. cups have 1" - 8 right-hand threaded bore to fit horizontal lap arbors. Kit consists of special splash guard and 1 each: 1", 1 1/2" and 2 1/2" cutter cups (base not included). Sphere cutting on this unit is simple. Just hold the rough sphere with gloved hand and grind it on the proper size sphere cutter shown. Shipping weight 9 lbs.
| SCK339 -- Sphere Cutting Tool Kit | $ 73.50 |
|