8" & 10" Trim Saws
 Model
No. 1510 with Power Feed
 1510
Mounted & Complete w/motor
|
A Clean Operating Saw Ideal for Trimming Rocks, Minerals and Glass
|
- Cast aluminum table top & tank
- 3 3/4" Roller bearing slab vise with bull dog grip
- Accurate cross feed adjustment
- Hold down hook keeps rock from climbing blade
- Adjustable blade guard
- Motor (optional)
- Power feed (optional
Bull dog grip vise holds all rock shapes and swings back out of the way
for hand trimming. Cross feed slabs for 3 1/2". Just pull the vise
back and set to scale to get the slab thickness you want. Hold down hook
(patent pending) runs under table top so rock can't climb the blade or
jam. Front shield protects operator from cutting waste.
Arbor has 5/8" diameter steel shaft. Ball bearing assembly has
grit slinger to protect precision bearings. Twin drains allow quick and
easy cleaning of Koolerant sump. Piggy back
motor mounts directly on back tank casting. Unit rests on rubber cushions
for quiet operation.
For units without power feed, accessories include nylon weight feed
cord and scales (to determine weight on vise feed). All units come
assembled with operating instructions and guarantee. Size 19"L x
14"W x 13"H. Shipping weight 30 lbs., 35 lbs. with power feed
(Motor sold and shipped separately). |
| MODEL# |
Weight Feed |
POWER
FEED |
16" x
24" Base |
1/3 HP
Motor |
HOOD |
COMPLETE |
| 1508TS |
$ 525.00
 |
$ 656.25
|
$ 52.50
|
$ 129.00
|
$ 96.50
|
$ 885.75
|
| 1510TS |
$ 550.00
|
$ 681.25
|
$ 52.50
|
$ 129.00
|
$ 96.50
|
$ 909.50
|
|
| TSH164 -- Clear molded Plexiglas hood for use with
the above saws. Roomy hand holes in each side allow plenty of room for
free cutting movement. Hood fits inside trim saw table edge and simply
sets in place. No holes to drill. Shipping weight 5 lbs. |
$ 96.50 |
|
| MTR282 -- 1/3 HP, 110V, H.D. Motor with switch,
pulley and belt for use with above saws. Shipping weight 25 lbs. |
$ 129.00 |
|
| CPF150 -- Deluxe Power Feed with
over-running clutch and cut-off switch for the above models. Shipping weight
6 lbs. |
$ 157.50 |
|
6" Faceter's Saw & Grinder
|
Trim Saw Features:
- Cast aluminum table & tank
- 1/2" Shaft with sealed ball bearings, greased for life
You can mount a 6" diamond blade for sawing or a 6" x
1/2" grinding wheel for grinding gemstones. Adjustable guard fits
both grinding wheel and blade. It's easy to interchange blade or wheel.
Unit required a 1/4 or 1/3 HP motor (not included). Saw comes with
instructions and guarantee. Shipping weight 12 lbs. |
Model No. 496FGS -- 6" Trim Saw & Grinder less blade & wheel.
|
$ 246.25 |
|
 |
Model No. TSV695 -- Slab Vise to fit saw unit above. Shipping weight 2 lbs.
|
$ 31.50 |
|
|
Mounted 6" Saw and Grinder
The #497 mounted 6”
saw and grinder comes complete with 1/3 hp motor, switch cord, 6”
Covington Double-Charged Diamond Blade and a 100 grit 6” x 1/2” grinding
wheel for grinding gemstones. Adjustable guard fits both grinding wheel
and blade. It's easy to interchange blade or wheel. Saw comes with
instructions and guarantee. Motor shipped separately. Size 13” x
8” x 9” Motor weight 16 lbs.
|
Model No. 497FSM -- 6" Mounted Saw and Grinder
Shipping weight 15 lbs.
|
$ 393.75 |
|
|
6" Rock Rascal Gem Maker
 
|
|
The model T is a complete lapidary
machine with sealed ball bearings, 1/2” threaded shaft, 6” diamond blade, 6”
x 1” grinding wheel, 6” sanding disc, 6” polish disc, V-belt and pulley.
The trim saw model J has the same saw used on the complete T model. Sold
Less Blade.
Both models are sold less motor.
Size 13"L x 11"W x 7"H. |
Model No. GMT082 -- Deluxe Gem Maker ("T")
Shipping weight 15 lbs.
|
$ 276.00
|
|
MVV081 -- Rock Vise ("V") for unit
Shipping weight 1 lb.
|
$ 23.00
|
|
Model No. TSJ080 -- Trim Saw less blade ("J")
Shipping weight 10 lbs.
|
$ 126.00
|
|
|
6" Beginners Gem Shop
|
An inexpensive 6" unit which saws, grinds & polishes.
Especially useful for those who already have a 1/4 or 1/3 HP, 110V, 1725
RPM motor.
|
| This unit is the same as the No. 496 trim saw and grinder,
but with a 6" diameter backing plate attachment. Saw table lifts out
for grinding and blade/wheel safety guard adjusts for both sawing and
grinding operations.
Comes with 6" Covington diamond blade, 6" x 1/2"
silicon carbide grinding wheel, backing plate for sanding and polishing
discs, sanding disc and leather polishing circle. Starter kit includes Koolerant,
polish powder, brush, dop stick, dop wax, instructions and guarantee.
Size: 11"L x 10"W x 8"H. Shipping weight 15 lbs. |
Model No. 457BGS -- 6" Beginners Gem Shop
|
$ 341.25 |
|
TSV695 -- Slab Vise
|
$ 31.50
|
|
|
10" Trim Saw Kit
|
| Kit includes 16" x 10 1/2" cast aluminum table,
#13 x 5/8" R.H. arbor, blade guard and front shield. Arbor bolts to
the inside of the box. comes with instructions and guarantee. You can
order motor, pulleys, belts and blades elsewhere in this catalog. Refer to
index for location and prices. |
186TSK -- 10" Trim Saw Kit
Shipping weight 10 lbs.
|
$ 157.50 |
|
|
Trim Saw Vise & Cross Feed
|
Complete Assembly for 1508 & 1510, 5008, and 5010
Saws.
|
 Vise
jaws take a 3 3/4" high rock and will hold the work piece without
blocks or shims. Cross feed will adjust up to 3 1/2" before stone
must be repositioned in vise. The end of the cross arm shaft has a
"no bind" roller bearing and hook which ensures a smooth feed
and prevents rocks from "riding up" the blade. Parts include
vise assemble, cross arm shaft, cross feed and knob, weight feed cord and
scales. |
TSV159 -- Trim Saw Vise and Cross Feed
Shipping weight 6 lbs.
|
$ 125.00 |
|
